Omar Limited

• Smooth non-reversing flow characteristics

• Constant flow at any given stem position

• Fifteen turns full open to full close provides high turn to lift ratio for excellent resolution

• Six interchangeable needle tapers, each increases capacity by an approximate factor of three

• O-ring seal cannot be damaged by overtightening

• Panel mounting nuts included - standard

• 1/8" NPT connections integrally machined into body

Control valves are designed specifically for extremely low flow gas and liquid applications. Straight and 90° angle pattern models in stainless steel are available. They feature a means of adjusting a sliding tapered needle which prevents sticking due to foreign matter in the fluid. These valves are particularly suitable for precise control requirements and possess a high turns to lift ratio. The flow is constant for any given stem position.

Six needles with different tapers provide a wide choice of flow ranges. Needles and

orifices can be changed without removing the valve body from the line (two different

orifices are used, one for needle sizes 1-3, another for sizes 4-6).

Dimensions (mm)