Product Category

More

H - UPE Series flat fan spray nozzle

Location:Home > PRODUCTS > Lorric nozzle

H - UPE Series flat fan spray nozzle

Recommended working pressure : 3.0 kgf/cm²

Flowrate tolerance : ±5%

Angle tolerance : ± 5°
Details|Hits:2520|Print|Back
Introduction

 * The spraying type is fan type, and the spray shape is single line and two sides are tapere (tapered edge), which presents a bell curve shape flow field distribution with weaker ends compared to the middle.

 

 * Single-piece design, if there is frequent maintenance or replacement requirements, it is recommended to use quick install with multiple pieces nozzles.

 

 * LORRIC UPE nozzle provides longer lifetime, because we precisely machine it from ultra­high molecular weight polyethylene rod.

 

 * UPE has high abrasion wear resistance, it’s suitable for liquid with solid particles.

 

 * LORRIC UPE nozzle has twice to four times the lifetime of no brand nozzle. You don’t need to stop the machine frequently for changing nozzle. LORRIC nozzle can lower your maintenance cost.

 

 * Although precise UPE product is very difficult to manufacture, LORRIC UPE nozzle still guarantees flow volume and spray angle tolerance within ±5% and ± 5 degree. And the spray pattern is just as good as our other nozzle series so you don’t have to compromise nozzle performance with nozzle lifetime.

 

Applications:

 

 * Dispersion: Abrasive(Sand-blasting machine)