Product Category

More

D Clamp - Industrial Low Pressure Wide Angle Flat Fan Clamp Nozzle

Location:Home > PRODUCTS > Lorric nozzle

D Clamp - Industrial Low Pressure Wide Angle Flat Fan Clamp Nozzle

Recommended working pressure : 1.5 kgf/cm²

Flowrate tolerance : ± 10% @ 1.5 ± 0.1kgf/cm²

Angle tolerance : ± 10° @ 1.5 ± 0.1kgf/cm²

Details|Hits:2437|Print|Back
Introduction

 * The spray pattern is fan type, and the spray shape is single-line.

 

 * Low-pressure wide-angle nozzles can achieve large angle coverage under 1.5kgf/cm² pressure. The coverage area is smaller than the standard fan type 3kgf/cm² operating pressure, and is more suitable for low-pressure working environment.

 

 * Spray the nozzle at an angle of 75° with respect to the axis of the nozzle. Check the environment before installation.

 

 * The hooked nozzle tip is designed to reflect the water into a fan shape nozzle and greaten particle passage to prevent clogging.

 

 * Multi-piece structure, easy maintenance, cleaning and replacement, and can save the cost of replacement nozzle head; filter design, easy maintenance, reduce blocking, and can reduce damage caused by maintenance and unclogging.

 

 * PVDF is resistant to temperature and corrosive chemical solutions.

 

 * size:

      * Spec of drilling installation hole: 8.35~9m/m

      * Size of Pipe clamp: 3/4"(OD26 +/-0.2mm), 1"(OD34+/-0.3mm)

 

 * If operation pressure is greater than 4kgf/cm², May cause the liquid to overflow without fogging.

 

Applications:

 

 * Cleaning: Conveyor belt, film, copper thin, paper, glass plate, all kinds of plates, filters, dust and gravel, and machine tool cleaning.

 

 * Cooling: Conveyor belt, gas, tank, machinery, metal, roof etc.

 

 * Dispersion: Humidifying, Chemicals, firefighting, dedust, deodorization, defoaming, etc.